OT8200 Multi-Service Platform

The OnMetro OT8200 is a Multi-Service Platform that offers a full range of solutions for service provider and enterprise, including high density 10G/40G/100G connectivity, distance extension, Ethernet Switch/NID, Fiber Modem, Fiber Multiplexer and Media Converter. It is a fully modular product series that integrates a wide range of optical transport modules for any interface or protocol.

Chassis Overview:

Model	Num of Slot	Slot for NMC	Slot for LC (line card)	Slot for PWR	Slot for FAN	Product
OT8200-1U	10	1	5	2	2
OT8200-3U	22	1	17	2	2
OT8200-2S	2	1	1	N/A	N/A
OT8200-3S	3	1	2	N/A	N/A

Line Card Overview:

Model	Description	Function	Product
OT8200-NMC	- Embedded software on the NMC - Supports CLI based, Web-based and SNMP management options
OT8200-10GE-2SFP+	- 2 SFP+ ports - 10G Ethernet Media Converter
OT8200-10GE-3SFP+	- 3 SFP+ ports, with APS function - Switch-over time < 50ms - 10G Ethernet Media Converter
OT8200-10GE-MUX8	- 8 SFP ports, 2 SFP+ ports - Switch-over time < 50ms - 10G Ethernet multiplexer
OT8200-3R-100G-1Q1C	- 1 QSFP28 port, 1 CFP2 port - 100G/40G 3R Transponder
OT8200-3R-100G-2Q	- 2 QSFP28 ports - 100G/40G 3R Transponder
OT8200-3R-40G-1Q4S	- 1 QSFP+ port, 4 SFP+ ports - 40G 3R Transponder
OT8200-3R-10G-2SFP+	- 2 SFP+ ports - 10G (Multi-Rate) 3R Transponder
OT8200-3R-10G-4SFP+	- 4 SFP+ ports - APS option, Switch-over time < 50ms - 10G (Multi-Rate) 3R Transponder
OT8200-OP-D	- 1+1 protection, dual fiber - Switch-over time < 20ms

Highlights

Compliance with Carrier Grade Standards, all the features of a carrier class

Flexible mix of services, including up to 100G connectivity, distance extension, Ethernet demarcation, media converter and multiplexer

Protocol transparent (Ethernet, SDH STM16/STM64, OTUx/ OTUxe, Fiber Channel, OBSAI, CPRI /eCPRI) and low latency, can be used in data network, storage area network (SAN), mobile fronthaul network, video network, OTN etc.

Centralized management via NMC, telnet, web, console, SNMP and EMS/NMS solutions, simple to Install, configuration and maintenance

Redundant design for AC/DC PSU and FAN unit, Standard 19-inch rack mounted

PSU, FAN, network management card and line cards are hot swappable, allowing online field replacement

All products are green technology with low power consumption compliant with international standards

Automatic link switchover protection within 50ms for active SFP protection links or within 10ms for passive fiber protection links

Support Remote Fault Detection (RFD) or Link fault pass-through (LFP) function

Remote power on/off detection with dying gasp alarm and dual power supplies

Pay-as-you grow architecture, scalable, flexible for future growth

No extra licensing or server cost

Application

Business Ethernet, Leased Line

Ethernet demarcation, guaranteed SLA, separate customer network from operator network

In-band management capabilities and remote performance monitoring

Media conversion (copper/fiber, MM/SM, dual fiber / single fiber)

Flex bandwidth control, effective ROI

E2E(End to End) hard pipe – fine granularity

QoS – Guaranteed bandwidth, no packet loss

Transparent - Unaware to all upper service

Related Products:OT8200-10GE-2SFP+, OT8200-10GE-3SFP+, OT8200-10GE-MUX8, OT8200-3R-40G-1Q4S,OT8200-3R-100G-1Q1C, OT8200-3R-100G-2Q, OT8200-3R-10G-2SFP+, OT8200-3R-10G-4SFP+

Network Schematic: Typical deployed in pairs mode, or in standalone mode, or in multi-user multiplexing mode.

Solution1:1GE~10GE flex bandwidth

Low operation and maintenance cost.

Adjust bandwidth quickly.

Solution2:4*10GE Multiplex to 1*40GE

Saving fiber resource.

Solution3:8*1GE Multiplex to 1*10GE with Protection (Active Mux/Demux)

Saving fiber resource.

Low cost than WDM solution.

Solution4:Cost-effective 100G/40G Access

Plug & Play, less space, low cost, and low power consumption.

Connection Between Data Centers

3R (Regenerator, Reshaper, Retimer)

Supports 100G/40G repeater mode or multiplexer mode

SR4/LR4/ER4 distance extension

Protocol transparent, Ultra low latency

Related Products: OT8200-3R-100G-1Q1C, OT8200-3R-100G-2Q

Solution1:100G connection distance extension

Solution2:100G connection distance extension with WDM

4x25G modules will be cheaper than 10x10G modules, cheaper than 100G DWDM transponder

The power consumption of 4x25G SFP28 is much lower than that of typical 10x10G SFP+, which also gives an advantage in operating costs

For optical fiber links, migrating from 10G to 100G requires using 10x10G channels, but only 4 channels are needed for 25G to 100G connections, which can greatly save link resources

Solution3:DWDM Solution for Long Distance 40G Network

This solution enables the use of inexpensive and simple 10Gb DWDM systems to extend a 40GbE service, avoiding the need for new hardware or for an entirely new cabling infrastructure, providing a significant investment protection.

Building Agile CWDM, DWDM Infrastructure

3R transponder/muxponder add electrical multiplexing in front of the wavelength

Aggregating multiple services into a single wavelength

Protocol transparent; Ultra low latency

Fast turn up of new services

Easy to manage

Low OPEX

Simple Maintenance and Support

Related Products: OT8200-3R-40G-1Q4S, OT8200-3R-100G-1Q4S,OT8200-3R-100G-1Q1C, OT8200-3R-100G-2Q, OT8200-3R-10G-2SFP+, OT8200-3R-10G-4SFP+，OT8200-OP-D

Network Schematic:

ATM	SONET	OC-3,OC-12,OC-24,OC-48,OC-96,OC-192
ATM	SDH	STM-1,STM-4,STM-16,STM-64
DATA	Ethernet	FE, 1GE, 2.5GE, 5GE, 10GE LAN, 10GE WAN, 25GE, 40GE, 100GE
MOBILE	OBSAI	OBSAI x1, x2, x4, x8
MOBILE	CPRI	CPRI Option1,2,3,4,5,6,7,8,9,10, eCPRI
SAN	Fiber Channel	1/2/4/8/10/16/32/128G FC
VIDEO	Video	HD-SDI, 3G-SDI,6G-SDI,12G-SDI,24G-SDI
HPC	Infiniband	SDR, DDR, 10G SDR, QDR, FDR-10, FDR, EDR, 40G FDR10, 56G FDR, 100G EDR
OTN	OTU	OTU1,OTU1e, OTU1f, OTU2, OTU2e, OTU2f, OTU3, OTU3e1, OTU3e2, OTU4
OTN	ODU	ODU0,ODU1,ODU1e,ODU2,ODU2e,ODU3,ODU3e2,ODU4

OT8200 Platform - Carrier Transponder & MC

No right product found ?

Related accessory products ?