G.hn to Ethernet Managed End Point with support for Reverse Power FeedContact Us
Reverse Power Feed Series
To avoid the cost of running a powerline to individual units, the DPU can be powered through reverse powering from the customer premises using a Reverse Power G.hn CPE. Reverse powering the DPU does come with its own challenges.
First of all, the DPU needs to be powered even if only one end-user takes on the service. As there is no guarantee that everyone in the neighborhood or MDU will sign up for the higher speed services, the DPU needs to be functional, independent of the number of end-users connected.
Secondly there needs to be equal power sharing between subscribers. When multiple G.hn CPEs are connected to the DPU, each CPE needs to provide an equal amount of power to ensure one end-user doesn’t get loaded with the entire cost of powering the device.
It allows customer self-install which removes the need for a visit to the customer premises with its attendant cost, time, and logistical downsides. And last but not least, the DPU needs to work at all times, even during the edge cases.
This solution is utilizing the legacy coax for high-speed data and power – neither of which were envisaged when the cable was installed many years ago. In addition, being connected to the coax network means lightning effects need to be considered carefully in relation to device protection and continuity of reverse powering for all subscribers. Optimization is required to ensure an always-on network.
CP-4201TR is a CPE(Customer Premise Equipment) of Reverse Power Feed Series, it provides one G.hn port (RJ11 connector) with Reverse powered based on IEEE 802.3at Power over Ethernet (PoE) mechanism.
The lowest CAPEX, the highest ROI, eliminates the disruption & cost to rewire
Same ARPU as fiber, the fastest time to revenues, profitable even at low initial take rates
Expand new business areas, such as IPTV, Wi-Fi, Cloud Storage
Gigabit Network, satisfy customers, rent value and condo value increase
1 * G.hn port (RJ11 connector) with RPF (Reverse Power Feeding), support MIMO and SISO options
Reverse powered based on IEEE 802.3at Power over Ethernet (PoE) mechanism
1 * 10/100/1000BaseT RJ45 ports
USB Type-C power supply, PD3.0
First Mile’s Reverse Power Feed Series includes G.hn DPU (Distribution Point Unit) and G.hn CPE (Customer Premise Equipment).
G.hn Copper Access solution delivers 1Gbps on 1-pair copper up to 150 meters and 1Gbps on 2-pair copper up to 250 meters.