Home
Solutions
Back > Business Ethernet WDM Infrastructure Gigabit Ethernet Aggregation Carrier Ethernet FE/GE Media Conversion Switch Customization
Products
Back > Carrier Transponder & MC Industrial Ethernet Switch ODM | OEM Service
Company
Back > About Us News Center
Support
Back > Q&A Download
Contact Us

1 GE Port Coax CPE with RPF

G.hn to Ethernet Managed End Point with support for Reverse Power Feed

Contact Us
CP-4201CR
CP-4201CRGet Spec Sheet

Reverse Power Feed Series


To avoid the cost of running a powerline to individual units, the DPU can be powered through reverse powering from the customer premises using a Reverse Power G.hn CPE. Reverse powering the DPU does come with its own challenges.

First of all, the DPU needs to be powered even if only one end-user takes on the service. As there is no guarantee that everyone in the neighborhood or MDU will sign up for the higher speed services, the DPU needs to be functional, independent of the number of end-users connected.

Secondly there needs to be equal power sharing between subscribers. When multiple G.hn CPEs are connected to the DPU, each CPE needs to provide an equal amount of power to ensure one end-user doesn’t get loaded with the entire cost of powering the device.

It allows customer self-install which removes the need for a visit to the customer premises with its attendant cost, time, and logistical downsides. And last but not least, the DPU needs to work at all times, even during the edge cases.

This solution is utilizing the legacy coax for high-speed data and power – neither of which were envisaged when the cable was installed many years ago. In addition, being connected to the coax network means lightning effects need to be considered carefully in relation to device protection and continuity of reverse powering for all subscribers. Optimization is required to ensure an always-on network.


CP-4201CR is a CPE(Customer Premise Equipment) of Rugged Reverse Power Feed Series, it provides one G.hn port (F connector) with Reverse powered based on IEEE 802.3at Power over Ethernet (PoE) mechanism.

Highlights

The lowest CAPEX, the highest ROI, eliminates the disruption & cost to rewire

Same ARPU as fiber, the fastest time to revenues, profitable even at low initial take rates

Expand new business areas, such as IPTV, Wi-Fi, Cloud Storage

Gigabit Network, satisfy customers, rent value and condo value increase

1 * G.hn port (F connector) with RPF (Reverse Power Feeding)

Reverse powered based on IEEE 802.3at Power over Ethernet (PoE) mechanism

1 * 10/100/1000BaseT RJ45 ports

USB Type-C power supply, PD3.0

Need help getting started?
Contact us now!
Application
Network

First Mile’s Reverse Power Feed Series includes G.hn DPU (Distribution Point Unit) and G.hn CPE (Customer Premise Equipment).

Performance

G.hn Coax Access solution delivers 1Gbps on RG-59 coaxial cable up to 300 meters (1000 feet) and 1Gbps on RG-6 coaxial cable up to 800 meters (2600 feet).

No right product found ?

Click here

Related accessory products ?

Click here

Founded in 2003,
First Mile specializes in carrier-grade telecom products' development.
Email: sales@firstmile.com.cn

Solutions
Business Ethernet WDM Infrastructure Gigabit Ethernet Aggregation Carrier Ethernet FE/GE Media Conversion Switch Customization
Products
Carrier Transponder & MC Industrial Ethernet Switch WDM Products Optical Transceivers ODM | OEM Service
Company
About Us
Support
Download
Contact Us

Phone: +86 755 26712312

Address: 5th Floor, Block R3-A, High-Tech Industrial Park, Nanshan District, Shenzhen, P.R. China 518057


Email: sales@firstmile.com.cn

©2019 First Mile Communications Ltd., All rights reserved.